Verkol

Application	Recommendation		Capacity (ltr)
Engine (D / DT)	(a)		19.0
Transmission	VERKOL SAE 30 TO-4		40.0
Coolant			29.0
Hydraulics	VESTA 10w HD (b, c, d, e, f, g)		53.0
Differentials & Final Drives (each)	VERKOL SAE 10w TO-4 (h, i, j, k, l)		25.5
Grease Points (Molybdenum)	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Grease Points (Multipurpose Lithium Greases)	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Grease Points (special purpose high temperature anti friction bearings)

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.: -20°C to 40°C
d.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
e.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
f.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
g.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
h.: Final Drives (each) & -30°C to 0°C
i.: Alternative recommendations, Final Drives (each), -20°C to 25°C: VERKOL SAE 30 TO-4
j.: Alternative recommendations, Final Drives (each), -10°C to 40°C: TF CAT TO4 40
k.: Alternative recommendations, Final Drives (each), 0°C to 50°C: VERKOL SAE 50 TO-4
l.: Alternative recommendations: TF CAT TO4 40

There are no notes to display for this model