Verkol

Application	Recommendation		Capacity (ltr)
Engine (D / DT)	(a)		7.2
Rear Axle (AWS)	1	VERKOL GT-8/80w90 EP (b, c, d, e)	8.3
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Rear Axle (non-AWS, 133-7234 Brake Discs)	(f, g)		24.0
Rear Axle (non-AWS, 230-4017 Brake Discs)	VERKOL SAE 30 TO-4 (f, h)		24.0
Transmission	VERKOL SAE 30 TO-4		19.0 - 20.5
Front Axle (AWD)	(i)		11.0
Coolant			23.0 - 26.0
Brake Fluid	VERKOL SAE 10w TO-4 (j)		0.7
Hydraulics	VESTA 10w HD (j, k, l, m, n, o)		49.0
Grease Points	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Front Axle Final Drives (AWD each)	(p)		0.7
Rear Axle Final Drives (AWS, each)	1	VERKOL GT-8/80w90 EP (q, r, s)	1.6
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Use oil additive as directed. CAT 9x-2037 can be used as an alternative.
c.: -20°C to 40°C
d.: Alternative recommendations, -30°C to 40°C: VERKOL GT-8/75w90
e.: Alternative recommendations, -10°C to 50°C: VERKOL GT-7/85w140 EP
f.: Use 197-0017 axle & brake oil additive as directed.
g.: -25°C to 40°C
h.: -25°C to 40°C
i.: -30°C to 25°C
j.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
k.: -20°C to 40°C
l.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
m.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
n.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
o.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
p.: -30°C to 25°C
q.: -20°C to 40°C
r.: Alternative recommendations, -30°C to 40°C: VERKOL GT-8/75w90
s.: Alternative recommendations, -10°C to 50°C: VERKOL GT-7/85w140 EP

There are no notes to display for this model