VERATEK 10w40

Application	Recommendation	Capacity (ltr)
Engine (EN590/D975 <15ppm) (FPT F2CFE614B, 6-cyl, 8.7L; 223kW)	VERATEK 10w40 (a, b, c, d, e, f)	28.5
Rear Axle (Without cooler / With cooler)	VESTA JD (g)	64.0 / 67.7
Transmission	VESTA JD (h, i)	45.4
Front Axle (Diff lock / Diff lock with cooler)	VESTA JD (g)	62.0 / 65.7
Front Axle (Without cooler / With cooler)	VESTA JD (g)	64.0 / 67.7
Coolant	(j)	56.8
Hydraulic Brake System
Hydraulics (Tank / System)		134 / 250
Grease Points	QUAKERTEK MOLYVERKOL 2 (k)
Diesel Exhaust Fluid (DEF) Tank		90.8

a.: -25°C to 45°C
b.: Alternative recommendations, -34°C to 0°C: EO CNH 3521 0W-30
c.: Alternative recommendations, -30°C to 45°C: EO CNH 3521 0W-40
d.: Alternative recommendations, -30°C to 10°C: EO CNH 3521 10W-30
e.: Alternative recommendations, -25°C to 45°C: EO CNH 3521 10W-40
f.: Alternative recommendations, -25°C to 10°C: VERKOPLUS 10w30 MSA
g.: 2WS models as from Jan 2006 & serial number N6GH04458. Rear axles to use Akcela Hy-Tran Ultra plus Axle Oil Additive (AOA). Front axles to use Akcela Hy-Tran Ultra WITHOUT AOA. Affected machines will be identified by a decal on the LH side of the main chassis.
h.: -30°C to 50°C
i.: Alternative recommendations, -40°C to 25°C: WB CNH 3526 0W-20
j.: Mix ratio, 50% >-37°C
k.: Alternative recommendations: GR CNH 3550-C 2

There are no notes to display for this model