Verkol

Application	Recommendation		Capacity (ltr)
Engine (DT)	(a)		20.0
Rear Axle	1	VERKOL GT-8/80w90 EP	17.0
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Transmission	VERKOL SAE 30 TO-4		17.0
Front Axle	1	VERKOL GT-8/80w90 EP	20.0
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Coolant			33.0
Hydraulics (Reservoir/System)	VESTA 10w HD (b, c, d, e, f, g)		150 / 310
Front Axle Bearings	QUAKERTEK MOLYVERKOL 2
Front Final Drives (each)	1	VERKOL GT-8/80w90 EP	3.0
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Greases: Molybdenum	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Greases: Multipurpose	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Greases: Special Purpose (high temp. antifriction bearings)
Rear Final Drives (each)	1	VERKOL GT-8/80w90 EP	7.2
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Swing Gear	QUAKERTEK ASTURUS 2
Swing Gearbox	VERKOL SAE 50 TO-4 (h, i, j, k, l)		8.0

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.: -20°C to 40°C
d.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
e.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
f.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20
g.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
h.: -15°C to 50°C
i.: Alternative recommendations, -30°C to 25°C: TF CAT TDTO TMS
j.: Alternative recommendations, -30°C to 0°C: TF CAT TDTO 10W
k.: Alternative recommendations, -25°C to 35°C: VERKOL SAE 30 TO-4
l.: Alternative recommendations, -15°C to 50°C: VERKOL SAE 50 TO-4

There are no notes to display for this model