Our Recommendation
VERATEK 10w40
- Make
- VALTRA incl. VALMET
- Model
- N163 V (N3 Series Versu)
- Engine
- DT
- Year
- 2013-
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (AGCO 49AWI, SCR; 120kW)
|
VERATEK 10w40 (a) |
17.5
|
|
|
Transmission
|
(b) |
65.0
|
|
|
Front Axle Differential (Hi-lock industrial axle - Dana 745/512 or 745/508)
|
SALDUBA 80w90 LS |
8.5
|
|
|
Coolant
|
(c) |
19.0
|
|
|
Hydraulics
|
1
|
MULTIVESTA OP (d) |
62.0
|
2 |
VESTA HV 46 | ||
|
Front Axle Hubs (Hi-lock industrial axle - Dana 745/512 or 745/508 - each)
|
SALDUBA 80w90 LS (e) |
2.0
|
|
|
Grease Points
|
QUAKERTEK MOLYVERKOL 2 |
|
|
|
Front PTO (without/with Pivoting Front Linkage)
|
(f) |
2.7 / 2.5
|
|
- Hide NotesGeneral Notes
- Hide Oil Change IntervalsOil Change Intervals
Lubricant / Capacity Notes
- a.
- -25°C to 40°C
- b.
- Alternative recommendations: GO VAL XT60 plus
- c.
- Mix ratio, 50% >-40°C
- d.
- Alternative recommendations: GO VAL XT60; GO VAL XT60 plus; HY HEES 46
- e.
- Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
- f.
- Alternative recommendations: ATF ALL C4S
General Notes
- 1.
- 2005, 2105 models: 'TRAC-TROL' and Servosystem: or, after flushing: VESTA C4 10w30
- 2.
- VERKOAGRI STOU 15w40 may be used in all applications (for hydraulics, 10W-30 grades only) except those models requiring a limited slip oil for front axles and hubs
Oil Change Intervals
Engine (DT) (AGCO 49AWI, SCR; 120kW)
- Hours Max
- 500
Transmission
- Hours Max
- 2000
Front Axle Differential (Hi-lock industrial axle - Dana 745/512 or 745/508)
- Hours Max
- 1000
Coolant
- Hours Max
- 2000
Hydraulics
- Hours Max
- 1000
Front Axle Hubs (Hi-lock industrial axle - Dana 745/512 or 745/508 - each)
- Hours Max
- 1000
Front PTO (without/with Pivoting Front Linkage)
- Hours Max
- 500