Our Recommendation

Make
CATERPILLAR
Model
SM 350 (Roadway Recyler-Ground Stabilisers)
Engine
D
New Search Print
Application
Recommendation
Capacity (ltr)
Engine (D)
  (a)
34.0
Transfer Box
1
VERKOL GT-8/80w90 EP
17.0
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Coolant
VERKOL TRUCK 50%
61.0
Hydraulics
VESTA 10w HD (b, c, d, e, f, g)
136
Axle Motor Rotor
1
VERKOL GT-8/80w90 EP
17.0
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Chain Cases
1
VERKOL GT-8/80w90 EP
17.0
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Drive Rotor Reduction
1
VERKOL GT-8/80w90 EP
3.8
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Grease Points (Molybdenum)
1
QUAKERTEK ATLANTA 2
2
QUAKERTEK VERKOMAX R 250
3
QUAKERTEK MOLYVERKOL 2
Grease Points (Multipurpose Lithium Greases)
1
QUAKERTEK VITALIA BF
2
QUAKERTEK VERKOPLEX XP-2
3
QUAKERTEK TERMOPLEX 220 EP
Grease Points (special purpose high temperature anti friction bearings)
 
Level Rotor
1
VERKOL GT-8/80w90 EP
1.9
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Reduction Hubs (each)
1
VERKOL GT-8/80w90 EP
2.4
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP
Rotor Gearbox
1
VERKOL GT-8/80w90 EP
12.0
2
SALDUBA 80w90 LS
3
VERKOL GT-7/80w90 EP

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.
-20°C to 40°C
d.
Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
e.
Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
f.
Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
g.
Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (D)
Hours Max
250
Transfer Box
Hours Max
1000
Coolant
Months Max
24
Hours Max
2000
Hydraulics
Months Max
18
Hours Max
3000
Axle Motor Rotor
Months Max
12
Hours Max
1000
Chain Cases
Hours Max
500
Drive Rotor Reduction
Hours Max
1000
Reduction Hubs (each)
Months Max
6
Hours Max
1000
Rotor Gearbox
Months Max
3
Hours Max
250