VERATEK 10w40

Application	Recommendation		Capacity (ltr)
Engine (EN590/D975 <15ppm) (Scania DC13, 12.7L, 257kW, DOC, SCR, DPF)	VERATEK 10w40 (a, b, c, d, e)		39.0 - 45.0
Rear Axle (ZF incl hubs With oil cooler)	(f, g)		45.3
Rear Axle (ZF incl hubs Without oil cooler)	(h, i)		42.0
Transmission (Powershift)	1	VERATEK 10w40 (j, k, l, m, n)	55.0
	2	EXTREM NG 10w40
	3	TITANIUM NG 10w40 UHPD
Front Axle (ZF incl hubs With oil cooler)	(o, p)		46.0
Front Axle (ZF incl hubs Without oil cooler)	(q, r)		42.0
Coolant	(s)		50.7
Hydraulics (Reservoir/System)	1	MULTIVESTA OP (t, u, v, w)	125 / 250
Hydraulics (Reservoir/System)	2	VESTA HV 46	125 / 250
Grease Points	QUAKERTEK ASTURUS 2 (x)
Diesel Exhaust Fluid (DEF) Tank			60.0

a.: -20°C to 40°C
b.: Alternative recommendations, -40°C to 40°C: E9S 0W-40; CJ-4S 0W-40
c.: Alternative recommendations, -25°C to 40°C: E9 5W-40; CJ-4 5W-40
d.: Alternative recommendations, -20°C to 40°C: VERATEK 10w40
e.: Alternative recommendations, -10°C to 40°C: VERKOPLUS 15w40 MSA
f.: -20°C to 40°C
g.: Alternative recommendations, -20°C to 40°C: WB ZEF 05F 10W-30
h.: -20°C to 40°C
i.: Alternative recommendations, -20°C to 40°C: WB ZEF 05F 10W-30
j.: -20°C to 40°C
k.: Alternative recommendations, -40°C to 40°C: E7S 0W-40; CI-4S 0W-40
l.: Alternative recommendations, -25°C to 40°C: E7 5W-40; CI-4 5W-40
m.: Alternative recommendations, -20°C to 40°C: VERATEK 10w40 / EXTREM NG 10w40 / TITANIUM NG 10w40 UHPD
n.: Alternative recommendations, -10°C to 40°C: VERKOPLUS 15w40 LD / VERKOPLUS 15w40 MSA
o.: -20°C to 40°C
p.: Alternative recommendations, -20°C to 40°C: WB ZEF 05F 10W-30
q.: -20°C to 40°C
r.: Alternative recommendations, -20°C to 40°C: WB ZEF 05F 10W-30
s.: Mix ratio, 50% >-35°C
t.: -15°C to 35°C
u.: Alternative recommendations, -50°C to -20°C: VESTA HVS 15
v.: Alternative recommendations, -20°C to 20°C: VESTA HV 32
w.: Alternative recommendations, 0°C to 50°C: VESTA 5B / VESTA HV 68
x.: -30°C to 50°C

There are no notes to display for this model