VERATEK 10w40

Make: TAKEUCHI
Model: TB 295W, Tier4f/Eu Stage V, 9.5t (Wheeled Excavators)
Engine: EN590/D975 <15ppm
Year: 2020-

Application	Recommendation		Capacity (ltr)
Engine (EN590/D975 <15ppm) (Deutz TCD 3.6L4, 4-cyl, DOC+DPF+SCR; 85kW)	VERATEK 10w40 (a, b, c, d)		10.0
Transmission	1	VERKOL GT-8/80w90 EP (e)
Transmission	2	ENGRANAJES 80w90 EP
Front Axle Differential	SALDUBA 80w90 LS (f)		7.6
Rear Axle Differential	SALDUBA 80w90 LS (g)		7.8
Coolant	(h)		27.0
Hydraulics (Reservoir/System)	1	VESTA HM 46 (i, j, k, l)	95.0 / 200
	2	VESTA HLPD 46
	3	VESTA HLP 46
Hydraulics (Hammer Useage 100%/50% - Reservoir/System)	1	VESTA HM 46 (m, n, o, p)	95.0 / 200
	2	VESTA HLPD 46
	3	VESTA HLP 46
Grease Points	QUAKERTEK ASTURUS 2
Axle Pivot Bearings	1	QUAKERTEK ATLANTA 2 (q)
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Diesel Exhaust Fluid (DEF) Tank			10.0
Hubs	1	VERKOL GT-8/80w90 EP (r)	0.8
Hubs	2	ENGRANAJES 80w90 EP	0.8
Ring Gear & Pinion	QUAKERTEK ASTURUS 2
Swing Bearing	QUAKERTEK ASTURUS 2

Hide NotesGeneral Notes
Hide Oil Change IntervalsOil Change Intervals

Lubricant / Capacity Notes

a.: -20°C to 45°C
b.: Alternative recommendations, -30°C to 35°C: EO DTZ IV18 LA 5W-30
c.: Alternative recommendations, -20°C to 40°C: EO DTZ III18 LA 10W-30; EO DTZ IV18 LA 10W-30; EO DTZ IV10 LA 10W-30
d.: Alternative recommendations, -15°C to 45°C: EO DTZ III18 LA 15W-40; EO DTZ IV18 LA 15W-40
e.: Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP; WB ZEF 03E 10W-30/80W; WB ZEF 05F 10W-30/20W-40/80W; VERKOAGRI STOU 15w40 / VESTA JD
f.: Alternative recommendations: LS GL-4 80W-90; WB ZEF 03E 10W-30/80W; WB ZEF 05F 10W-30/20W-40/80W; VERKOAGRI STOU 15w40 / VESTA JD
g.: Alternative recommendations: LS GL-4 80W-90; WB ZEF 03E 10W-30/80W; WB ZEF 05F 10W-30/20W-40/80W; VERKOAGRI STOU 15w40 / VESTA JD
h.: Mix ratio, 50% >-41°C
i.: -5°C to 40°C
j.: Alternative recommendations, -20°C to >30°C: VESTA HM 32 / VESTA HLPD 32 / VESTA HLP 32
k.: Alternative recommendations, -10°C to >40°C: HY TAK ISOVG 46
l.: Alternative recommendations, 5°C to >40°C: VESTA HM 68 / VESTA HLP 68
m.: -5°C to 40°C
n.: Alternative recommendations, -20°C to >30°C: VESTA HM 32 / VESTA HLPD 32 / VESTA HLP 32
o.: Alternative recommendations, -10°C to >40°C: HY TAK ISOVG 46
p.: Alternative recommendations, 5°C to >40°C: VESTA HM 68 / VESTA HLP 68
q.: Alternative recommendations: GrLiM3% 2
r.: Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP; WB ZEF 03E 10W-30/80W; WB ZEF 05F 10W-30/20W-40/80W; VERKOAGRI STOU 15w40 / VESTA JD

General Notes

There are no notes to display for this model

Oil Change Intervals

Engine (EN590/D975 <15ppm) (Deutz TCD 3.6L4, 4-cyl, DOC+DPF+SCR; 85kW)

Months Max: 12
Hours Max: 500

Transmission

Hours Max: 1000

Front Axle Differential

Hours Max: 1000

Rear Axle Differential

Hours Max: 1000

Coolant

Months Max: 24
Hours Max: 2000

Hydraulics (Reservoir/System)

Hours Max: 2000

Hydraulics (Hammer Useage 100%/50% - Reservoir/System)

Hours Min: 600
Hours Max: 800

Grease Points

Hours Max: 10

Hubs

Hours Max: 1000

Ring Gear & Pinion

Hours Max: 50

Swing Bearing

Hours Max: 50