Our Recommendation
- Make
- CUMMINS incl. ONAN GENERATORS
- Model
- X15 Productivity Series, 430V - 605V, Stage5/Tier4f (X Series HD Engines)
- Engine
- DT
- Year
- 2020-
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, 6.0-6.9 mpg)
|
(a) |
53.0
|
|
|
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp - with OilGuard, >7.0 mpg [DT])
|
(b) |
53.0
|
|
|
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, <5.9 mpg [DT])
|
(c) |
53.0
|
|
|
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, >7.0 mpg [DT])
|
(d) |
53.0
|
|
|
Coolant
|
(e) |
|
|
- Hide NotesGeneral Notes
- Hide Oil Change IntervalsOil Change Intervals
Lubricant / Capacity Notes
- a.
- Alternative recommendations: EO CUM 20086; CK-4 10W-30; CK-4 15W-40
- b.
- Alternative recommendations: EO CUM 20086; CK-4 10W-30; CK-4 15W-40
- c.
- Alternative recommendations: EO CUM 20086; CK-4 10W-30; CK-4 15W-40
- d.
- Alternative recommendations: EO CUM 20086; CK-4 10W-30; CK-4 15W-40
- e.
- Mix ratio, 50% >-37°C
General Notes
- 1.
- Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in
- 2.
- Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used
Oil Change Intervals
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, 6.0-6.9 mpg)
- Km Max
- 80000
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp - with OilGuard, >7.0 mpg [DT])
- Km Max
- 112000
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, <5.9 mpg [DT])
- Km Max
- 64000
Engine (DT) (Cummins X15, DPF+SCR; 430-605hp, >7.0 mpg [DT])
- Km Max
- 120000