VERATEK 10w40

Application	Recommendation	Capacity (ltr)
Engine (DT) (AGCO 44AWF, SCR; 77kW)	VERATEK 10w40 (a, b, c)	15.0
Transmission	(d)	55.0
Front Axle Differential (Dana 730/503)	SALDUBA 80w90 LS	8.0
Front Axle Differential (Dana 730/574)	SALDUBA 80w90 LS	8.0
Front Axle Differential (Hi-Lock 740/557; 740/558; 740/559)	SALDUBA 80w90 LS	7.5
Coolant	(e)	18.0
Clutch (Turbine Clutch)	VESTA TD 2 (f)	7.85
Hydraulics	From Transmission
Front Axle Hubs (730/503; 730/574 - each)	SALDUBA 80w90 LS (g)	0.9
Front Axle Hubs (Hi-Lock 740/557; 740/558; 740/559 - each)	SALDUBA 80w90 LS (h)	0.8
Grease Points	QUAKERTEK MOLYVERKOL 2
Front PTO	(i)	2.8

a.: -25°C to 40°C
b.: Alternative recommendations, -25°C to 40°C: VERATEK 10w40; VERKOPLUS 15w40 MSA
c.: Alternative recommendations, -20°C to 40°C: VERKOPLUS 15w40 MSA
d.: Alternative recommendations: GO VAL XT60 plus
e.: Mix ratio, 50% >-40°C
f.: Alternative recommendations: VESTA TD 3
g.: Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
h.: Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
i.: Alternative recommendations: ATF ALL C4S

1.: 2005, 2105 models: 'TRAC-TROL' and Servosystem: or, after flushing: VESTA C4 10w30
2.: VERKOAGRI STOU 15w40 may be used in all applications (for hydraulics, 10W-30 grades only) except those models requiring a limited slip oil for front axles and hubs