Our Recommendation
TITANIUM NG 10w40 UHPD is recommended for your TEREX
- Make
- TEREX
- Model
- TA10 4WD Tier4i (Site Dumpers)
- Engine
- DT
- Year
- 2013-
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (Deutz TCD3.6 L4; 90kW)
|
TITANIUM NG 10w40 UHPD (a, b) |
9.0
|
|
|
Rear Axle (DANA 112)
|
7.0
|
||
|
Transfer Box (ITL TG 300)
|
1
|
VERKOL GT-8/80w90 EP |
0.9
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Transmission (ITL SS620 synchro shuttle)
|
VERKOL SAE 10w TO-4 |
13.0
|
|
|
Front Axle (DANA 112)
|
7.0
|
||
|
Coolant
|
(c) |
14.4
|
|
|
Brake Fluid
|
1
|
MULTIVESTA OP |
0.2
|
2 |
VESTA HV 46 | ||
|
Hydraulics
|
1
|
MULTIVESTA OP |
50.0
|
2 |
VESTA HV 46 | ||
|
Front Axle Hubs
|
2.7
|
||
|
Grease Points
|
QUAKERTEK ASTURUS 2 |
|
|
|
Centre Pivot
|
1
|
QUAKERTEK TERMOPLEX 220 EP |
|
2 |
QUAKERTEK ALHENA 1 EP | ||
3 |
QUAKERTEK ALHENA 2 EP | ||
|
Rear Axle Hubs
|
2.7
|
||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- -20°C to 40°C
- b.
- Alternative recommendations, -15°C to 40°C: EO DTZ III10 LA 15W-40; VERKOPLUS 15w40 MSA
- c.
- Mix ratio, 50% >-37°C
Oil Change Intervals
Engine (DT) (Deutz TCD3.6 L4; 90kW)
- Hours Max
- 500
Rear Axle (DANA 112)
- Hours Max
- 500
Transfer Box (ITL TG 300)
- Hours Max
- 500
Transmission (ITL SS620 synchro shuttle)
- Hours Max
- 1000
Front Axle (DANA 112)
- Hours Max
- 500
Coolant
- Hours Max
- 3000
Brake Fluid
- Hours Max
- 500
Hydraulics
- Hours Max
- 1000
Front Axle Hubs
- Hours Max
- 500
Rear Axle Hubs
- Hours Max
- 500