Our Recommendation

VERKOAGRI STOU 15w40 is recommended for your KRAMER ALLRAD

Make: KRAMER ALLRAD
Model: 280 (Wheeled Loaders)
Engine: D

Application	Recommendation		Capacity (ltr)
Engine (D)	1	VERKOAGRI STOU 15w40 (a, b, c, d)	4.7
Engine (D)	2	MAXIDIESEL 15w40 SHPD	4.7
Rear Axle	1	VERKOL GT-8/80w90 EP (e)	2.5
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Transmission	From Hydraulics
Front Axle	1	VERKOL GT-8/80w90 EP (f)	2.5
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Coolant	VERKOL TRUCK 50%		4.2
Hydraulics	1	MULTIVESTA OP (g)	40.0
Hydraulics	2	VESTA HV 46	40.0
Grease Points	1	QUAKERTEK EPX-2
	2	QUAKERTEK VERKOFARM
	3	QUAKERTEK MB-2
Front Hubs (each)	1	VERKOL GT-8/80w90 EP (h)	0.6
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Mounting Pins, Shafts etc
Rear Axle & Transfer Box	1	VERKOL GT-8/80w90 EP (i)	0.3
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Rear Hubs (each)	1	VERKOL GT-8/80w90 EP (j)	0.6
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.: Alternative recommendations: CF-4 10W-40; VERKOAGRI STOU 15w40 / MAXIDIESEL 15w40 SHPD
b.: Alternative recommendations, -10°C to 10°C: CF-4 20W-20
c.: Alternative recommendations, <-5°C: CF-4 10W
d.: Alternative recommendations, 5°C to 30°C: CF-4 30
e.: Manufacturer's recommendation, SALDUBA 80w90 LS
f.: Manufacturer's recommendation, SALDUBA 80w90 LS
g.: Alternative recommendations: VERKOL 10w40 MV INYECCION / VERKOL 10w40 TD MAX
h.: Manufacturer's recommendation, SALDUBA 80w90 LS
i.: Manufacturer's recommendation, SALDUBA 80w90 LS
j.: Manufacturer's recommendation, SALDUBA 80w90 LS

Oil Change Intervals

Engine (D)

Months Max: 1
Hours Max: 250

Rear Axle

Hours Max: 1000

Front Axle

Hours Max: 1000

Coolant

Months Max: 24
Hours Max: 2000

Hydraulics

Hours Max: 1500

Front Hubs (each)

Hours Max: 1000

Rear Axle & Transfer Box

Hours Max: 1000

Rear Hubs (each)

Hours Max: 1000