Application	Recommendation		Capacity (ltr)
Engine (D)	(a)		20.0
Rear Axle	VERKOL SAE 50 TO-4		34.0
Transmission	VERKOL SAE 30 TO-4		38.0
Front Axle	VERKOL SAE 50 TO-4		34.0
Coolant			42.0
Hydraulics	VESTA 10w HD (b, c, d, e, f, g)		93.0
Grease Points (Molybdenum)	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Grease Points (Multipurpose Lithium Greases)	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Grease Points (special purpose high temperature anti friction bearings)
Reduction Hubs (each)	VERKOL SAE 50 TO-4		4.0 - 9.0

There are no notes to display for this model

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.: -20°C to 40°C
d.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
e.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
f.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
g.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30