Application	Recommendation		Capacity (ltr)
Engine (D / DT)	(a)		8.5
Transmission	From Hydraulics
Differentials	SALDUBA 80w90 LS (b, c, d)		8.0
Final Drives (each)	SALDUBA 80w90 LS (e, f, g)		0.7
Coolant			14.0
Hydraulics	VESTA 10w HD (h, i, j, k, l, m)		49.0
Grease Points (Molybdenum)	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Grease Points (Multipurpose Lithium Greases)	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Grease Points (special purpose high temperature anti friction bearings)
Hydrostatic Drive	SALDUBA 80w90 LS (n, o, p)		1.2

There are no notes to display for this model

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -20°C to 50°C: LS 80W-140
c.: Alternative recommendations, -20°C to 40°C: SALDUBA 80w90 LS
d.: Alternative recommendations, -10°C to 40°C: SALDUBA 80w90 LS
e.: Alternative recommendations, -20°C to 50°C: LS 80W-140
f.: Alternative recommendations, -20°C to 40°C: SALDUBA 80w90 LS
g.: Alternative recommendations, -10°C to 40°C: SALDUBA 80w90 LS
h.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
i.: -20°C to 40°C
j.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
k.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
l.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
m.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
n.: Alternative recommendations, -20°C to 50°C: LS 80W-140
o.: Alternative recommendations, -20°C to 40°C: SALDUBA 80w90 LS
p.: Alternative recommendations, -10°C to 40°C: SALDUBA 80w90 LS