Our Recommendation
VERATEK 10w40 is recommended for your CATERPILLAR
- Make
- CATERPILLAR
- Model
- 430E (S/N PRA00001 - Up) (Backhoe Loaders)
- Engine
- DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
|
VERATEK 10w40 (a, b, c, d) |
7.2
|
|
|
Rear Axle
|
1
|
VERKOL GT-8/80w90 EP (e, f, g) |
16.5
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Transmission (Powershift)
|
VERKOL SAE 30 TO-4 (h, i, j, k, l) |
18.5
|
|
|
Transmission
|
From Hydraulics |
|
|
|
Front Differential (4WD if fitted)
|
1
|
VERKOL GT-8/80w90 EP (m) |
11.0
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Coolant
|
19.5 - 21.5
|
||
|
Hydraulics
|
VESTA 10w HD (n, o, p, q, r, s) |
40.0
|
|
|
Front Powered Axle Final Drives (each)
|
1
|
VERKOL GT-8/80w90 EP (t) |
0.7
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Rear Reduction Hubs (each)
|
1
|
VERKOL GT-8/80w90 EP (u) |
1.7
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
- b.
- -20°C to 50°C
- c.
- Alternative recommendations, -40°C to 40°C: EO CAT ECF-2/EO CAT ECF-3 0W-40
- d.
- Alternative recommendations, -30°C to 50°C: EO CAT ECF-2/EO CAT ECF-3 5W-40
- e.
- Use 197-0017 axle & brake oil additive as directed.
- f.
- B, C & D Series & 400E Series, Fixed rear axle: refer to operator's manual for recommendations & additive type and volume.
- g.
- -20°C to 40°C
- h.
- 0°C to 35°C
- i.
- Alternative recommendations, -20°C to 10°C: TF CAT TDTO 10W
- j.
- Alternative recommendations, -15°C to 43°C: TF CAT TDTO TMS
- k.
- Alternative recommendations, 0°C to 35°C: VERKOL SAE 30 TO-4
- l.
- Alternative recommendations, 10°C to 50°C: VERKOL SAE 50 TO-4
- m.
- -20°C to 40°C
- n.
- Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
- o.
- -20°C to 40°C
- p.
- Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
- q.
- Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
- r.
- Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20W
- s.
- Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
- t.
- -20°C to 40°C
- u.
- -20°C to 40°C
Oil Change Intervals
Engine (DT) (Caterpillar C4.4 ACERT Tier3 Euro3A 82kW)
- Months Max
- 3
- Hours Max
- 500
Rear Axle
- Months Max
- 6
- Hours Max
- 1000
Transmission (Powershift)
- Months Max
- 6
- Hours Max
- 1000
Front Differential (4WD if fitted)
- Months Max
- 6
- Hours Max
- 1000
Coolant
- Months Max
- 72
- Hours Max
- 12000
Hydraulics
- Months Max
- 18
- Hours Max
- 3000
Front Powered Axle Final Drives (each)
- Months Max
- 6
- Hours Max
- 1000
Rear Reduction Hubs (each)
- Months Max
- 6
- Hours Max
- 1000