Our Recommendation
VERKOAGRI STOU 15w40 is recommended for your VALMET
- Make
- VALMET
- Model
- 860.1 (Forwarders)
- Engine
- DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (SISU 66ETA)
|
1
|
VERKOAGRI STOU 15w40 |
24.0
|
2 |
VERKOPLUS 15w40 LD | ||
|
Transfer Gearbox
|
1
|
VERKOL GT-8/80w90 EP |
4.5
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Transmission
|
From Hydraulics |
|
|
|
Front Differential
|
SALDUBA 80w90 LS |
9.0
|
|
|
Coolant
|
VERKOL TRUCK 50% |
40.0
|
|
|
Hydraulics
|
1
|
MULTIVESTA OP (a, b, c, d) |
290
|
2 |
VESTA HV 46 | ||
|
Grease Points
|
(e) |
|
|
|
Bogie Housing (each)
|
1
|
VERKOL GT-8/80w90 EP |
28.5
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Crane Slew Gears
|
1
|
VERKOL GT-8/80w90 EP |
4.5
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Front Axle Differential & Reduction Hubs
|
SALDUBA 80w90 LS |
32.0
|
|
|
Rear Differential & Reduction Hubs
|
SALDUBA 80w90 LS |
32.0
|
|
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations, -25°C to 75°C: VESTA HV 22
- b.
- Alternative recommendations, -20°C to 90°C: VESTA HV 32
- c.
- Alternative recommendations, -10°C to 90°C: MULTIVESTA OP / VESTA HV 46
- d.
- Alternative recommendations, 0°C to 90°C: VESTA HM 68 / VESTA HLP 68
- e.
- Grease Points: manufacturer recommends grease with a temperature range of -30°C to 110°C with penetration of 265-295 MM/10, NLGI 2
Oil Change Intervals
Engine (DT) (SISU 66ETA)
- Hours Min
- 250
- Hours Max
- 400
Transfer Gearbox
- Hours Max
- 500
Front Differential
- Hours Max
- 500
Coolant
- Months Max
- 12
Hydraulics
- Hours Max
- 1000
Bogie Housing (each)
- Hours Max
- 500
Crane Slew Gears
- Hours Max
- 500
Front Axle Differential & Reduction Hubs
- Hours Max
- 500
Rear Differential & Reduction Hubs
- Hours Max
- 500