Our Recommendation
VERKOPLUS 15w40 MSA is recommended for your KOMATSU incl. VALMET
- Make
- KOMATSU incl. VALMET
- Model
- 931XC Tier4f (Wheeled Harvesters)
- Engine
- EN590/D975 <15ppm
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (EN590/D975 <15ppm) (AGCO 74-LFTN-D4, 190kW)
|
VERKOPLUS 15w40 MSA (a) |
24.0
|
|
|
Transfer Box
|
1
|
VERKOL GT-8/80w90 EP |
4.5
|
2 |
ENGRANAJES 80w90 EP | ||
|
Transfer Box (with cooling)
|
4.5
|
||
|
Transmission
|
From Hydraulics |
|
|
|
Differential (Single Axle)
|
SALDUBA 80w90 LS (b) |
32.0
|
|
|
Coolant
|
(c) |
35.0
|
|
|
Hydraulics
|
1
|
MULTIVESTA OP (d, e, f, g) |
220
|
2 |
VESTA HV 46 | ||
|
Grease Points
|
1
|
QUAKERTEK TERMOPLEX 220 EP (h) |
|
2 |
QUAKERTEK ALHENA 1 EP | ||
3 |
QUAKERTEK ALHENA 2 EP | ||
|
Bogie Axle (Differential with brake housing)
|
SALDUBA 80w90 LS (i) |
|
|
|
Bogie Housing (each)
|
1
|
VERKOL GT-8/80w90 EP |
55.0
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
|
Diesel Exhaust Fluid (DEF) Tank
|
43.0
|
||
|
Planetary Reduction Hubs (Single Axle)
|
SALDUBA 80w90 LS (j) |
8.0
|
|
|
Slewing Gear
|
1
|
VERKOL GT-8/80w90 EP |
10.0
|
2 |
SALDUBA 80w90 LS | ||
3 |
VERKOL GT-7/80w90 EP | ||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations: E9S 10W-40; CK-4 15W-40; CK-4S 10W-40
- b.
- Alternative recommendations: SALDUBA 80w90 LS
- c.
- Mix ratio, 50% >-35°C
- d.
- >-20°C
- e.
- Alternative recommendations, >-25°C: VESTA HV 32; DIN HVLPS 32
- f.
- Alternative recommendations, >-20°C: DIN HVLPS 46; HY HEES 46
- g.
- Alternative recommendations, >-10°C: VESTA 5B / VESTA HV 68
- h.
- Alternative recommendations: QUAKERTEK ALHENA 1 EP
- i.
- Alternative recommendations: SALDUBA 80w90 LS
- j.
- Alternative recommendations: SALDUBA 80w90 LS
Oil Change Intervals
Engine (EN590/D975 <15ppm) (AGCO 74-LFTN-D4, 190kW)
- Hours Max
- 500
Transfer Box
- Hours Max
- 1500
Transfer Box (with cooling)
- Hours Max
- 1500
Differential (Single Axle)
- Hours Max
- 1500
Coolant
- Months Max
- 60
Hydraulics
- Hours Max
- 2000
Bogie Axle (Differential with brake housing)
- Hours Max
- 1500
Bogie Housing (each)
- Hours Max
- 2000
Planetary Reduction Hubs (Single Axle)
- Hours Max
- 1500
Slewing Gear
- Hours Max
- 1000