Our Recommendation
VERATEK 10w40 is recommended for your NEW HOLLAND CONSTRUCTION
- Make
- NEW HOLLAND CONSTRUCTION
- Model
- MH PLUS C (Wheeled Excavators)
- Engine
- DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT)
|
1
|
VERATEK 10w40 |
17.0
|
2 |
TITANIUM NG 10w40 UHPD | ||
3 |
VERKOL 10w40 TD MAX | ||
|
Transmission
|
2.4
|
||
|
Coolant
|
25.0
|
||
|
Hydraulics
|
1
|
MULTIVESTA OP (a, b, c, d) |
140 - 260
|
2 |
VESTA HV 46 | ||
|
Grease Points
|
|
||
|
Rigid Axle Differential
|
7.8
|
||
|
Rigid Axle Reduction Hubs (each)
|
2.0
|
||
|
Steered Axle Differential
|
11.0
|
||
|
Steered Axle Reduction Hubs (each)
|
2.5
|
||
|
Swing Gearbox
|
3.5
|
||
|
Swing Ring Gear
|
|
||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations, -15°C to 25°C: VESTA HV 32
- b.
- Alternative recommendations, -9°C to 38°C: MULTIVESTA OP / VESTA HV 46
- c.
- Alternative recommendations, -2°C to 40°C: VESTA 5B / VESTA HV 68
- d.
- Alternative recommendations, 2°C to 45°C: HV 100
Oil Change Intervals
Engine (DT)
- Months Max
- 12
- Hours Max
- 500
Transmission
- Months Max
- 12
- Hours Max
- 1000
Coolant
- Hours Max
- 2000
Hydraulics
- Months Max
- 36
- Hours Max
- 3000
Rigid Axle Differential
- Months Max
- 12
- Hours Max
- 1000
Rigid Axle Reduction Hubs (each)
- Months Max
- 12
- Hours Max
- 1000
Steered Axle Differential
- Months Max
- 12
- Hours Max
- 1000
Steered Axle Reduction Hubs (each)
- Months Max
- 12
- Hours Max
- 1000
Swing Gearbox
- Hours Max
- 3000