Application	Recommendation		Capacity (ltr)
Engine (DT) (Cat 3516TA)	(a)		190
Coolant			500
Hydraulics (Tank/System)	VESTA 10w HD (b, c, d, e, f, g)		1,660 / 2,100
Carrier Roller - each	VERKOL SAE 30 TO-4		0.7
Final Drives (bearing compartment)	VERKOL SAE 50 TO-4		2.0
Final Drives (planetary gear compartment)	VERKOL SAE 50 TO-4		80.0
Final Drives (spur gear compartment)	VERKOL SAE 50 TO-4		11.0
Final Drives (travel brake compartment)	VERKOL SAE 50 TO-4		0.3
Greases: Molybdenum	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Greases: Multipurpose	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Greases: Special Purpose (high temp. antifriction bearings)
Pump Drive	VERKOL SAE 30 TO-4		90.0
Swing Gear
Swing Gearboxes (each)	VERKOL SAE 50 TO-4 (h, i, j, k, l)		14.0
Track Idlers (each)	VERKOL SAE 30 TO-4		6.0
Track Rollers (each)	VERKOL SAE 50 TO-4		2.0

There are no notes to display for this model

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
c.: -20°C to 40°C
d.: Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
e.: Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
f.: Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20
g.: Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
h.: -15°C to 50°C
i.: Alternative recommendations, -30°C to 25°C: TF CAT TDTO TMS
j.: Alternative recommendations, -30°C to 0°C: TF CAT TDTO 10W
k.: Alternative recommendations, -25°C to 35°C: VERKOL SAE 30 TO-4
l.: Alternative recommendations, -15°C to 50°C: VERKOL SAE 50 TO-4