Close Print

Our Recommendation

VERKOPLUS 15w40 LD is recommended for your CATERPILLAR

Make
CATERPILLAR
Model
385B (S/N MYA00001 - Up) (Tracked Excavators)
Engine
DT
Application
Recommendation
Capacity (ltr)
Engine (DT) (Caterpillar 3456 ATAAC 380kW)
1
VERKOPLUS 15w40 LD (a, b, c)
65.0
2
VERKOPLUS 15w40 MSA
Transmission
From Hydraulics
Final Drives (each)
VERKOL SAE 50 TO-4 (d, e, f, g, h)
21.0
Coolant (Reservoir/System)
 
4.5 / 101
Hydraulics
VESTA 10w HD (i, j, k, l, m)
566
Grease Points
1
QUAKERTEK ATLANTA 2 (n)
2
QUAKERTEK VERKOMAX R 250
3
QUAKERTEK MOLYVERKOL 2
Automatic Lubrication (grease) (if fitted)
1
QUAKERTEK VERKOMAX FGM 2 (o, p)
2
QUAKERTEK VERKOMAX R 250
3
QUAKERTEK VERKOMAX SG 2
Pivot Shaft Bearings
VERKOL SAE 30 TO-4 (q, r)
Swing Drive (each)
VERKOL SAE 50 TO-4 (s, t, u, v, w)
19.0
Swing Gear
QUAKERTEK ASTURUS 2
70.0
Track Roller Frame Recoil Spring
VERKOL SAE 30 TO-4 (x)
Track Rollers & Idlers
  (y)

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
-10°C to 50°C
c.
Alternative recommendations, -20°C to 40°C: VERKOPLUS 10w30 MSA
d.
-15°C to 50°C
e.
Alternative recommendations, -30°C to 25°C: TF CAT TDTO TMS
f.
Alternative recommendations, -30°C to 0°C: TF CAT TDTO 10W
g.
Alternative recommendations, -25°C to 25°C: VERKOL SAE 30 TO-4
h.
Alternative recommendations, -15°C to 50°C: VERKOL SAE 50 TO-4
i.
-20°C to 40°C
j.
Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
k.
Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
l.
Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20
m.
Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
n.
-20°C to 40°C
o.
-7°C to 20°C
p.
Alternative recommendations, -18°C to 0°C: GrCSC 1
q.
-20°C to 25°C
r.
Alternative recommendations, -10°C to 40°C: TF CAT TDTO 40
s.
-15°C to 50°C
t.
Alternative recommendations, -30°C to 25°C: TF CAT TDTO TMS
u.
Alternative recommendations, -30°C to 0°C: TF CAT TDTO 10W
v.
Alternative recommendations, -25°C to 35°C: VERKOL SAE 30 TO-4
w.
Alternative recommendations, -15°C to 50°C: VERKOL SAE 50 TO-4
x.
-20°C to 25°C
y.
-20°C to 25°C

Oil Change Intervals

Engine (DT) (Caterpillar 3456 ATAAC 380kW)
Months Max
3
Hours Max
500
Final Drives (each)
Months Max
12
Hours Max
2000
Coolant (Reservoir/System)
Months Max
72
Hours Max
6000
Hydraulics
Months Max
18
Hours Max
3000
Swing Drive (each)
Months Max
6
Hours Max
1000