Our Recommendation
VERKOPLUS 15w40 LD is recommended for your CASE CE
- Make
- CASE CE
- Model
- CX300C-8 (Tracked Excavators AMEA)
- Engine
- EN590/D975 <15ppm
- Year
- 2021-
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (EN590/D975 <15ppm) (Isuzu GH-6HK1X, 6-cyl, 7.8L, 202kW)
|
1
|
VERKOPLUS 15w40 LD (a, b, c) |
41.0
|
2 |
VERKOPLUS 15w40 MSA | ||
|
Engine (EN590/D975 500-1000ppm) (Isuzu GH-6HK1X, 6-cyl, 7.8L, 202kW [EN590/D975 500-1000ppm])
|
1
|
VERKOPLUS 15w40 LD (d, e, f) |
41.0
|
2 |
VERKOPLUS 15w40 MSA | ||
|
Coolant
|
(g) |
33.0
|
|
|
Hydraulics (Reservoir/System)
|
1
|
MULTIVESTA OP (h, i) |
147 / 300
|
2 |
VESTA HV 46 | ||
|
Hydraulics (Reservoir/System; Hammer Usage - 100%/40%)
|
1
|
MULTIVESTA OP (j, k) |
147 / 300
|
2 |
VESTA HV 46 | ||
|
Grease Points
|
QUAKERTEK ASTURUS 2 (l) |
|
|
|
Swing Gear Teeth
|
QUAKERTEK ASTURUS 2 (m) |
|
|
|
Swing Gearbox
|
VERKOL GT-8/80w90 EP (n) |
8.0
|
|
|
Travel Gearbox (Each)
|
VERKOL GT-8/80w90 EP (o) |
11.0
|
|
|
Turntable Bearing
|
|
||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- -10°C to 50°C
- b.
- Alternative recommendations, -20°C to 40°C: EO CNH 3622 10W-30; E7 10W-30; VERKOPLUS 10w30 MSA
- c.
- Alternative recommendations, -10°C to 50°C: EO CNH 3622 15W-40; VERKOPLUS 15w40 LD / VERKOPLUS 15w40 MSA
- d.
- -10°C to 50°C
- e.
- Alternative recommendations, -20°C to 40°C: EO CNH 3622 15W-40; E7 10W-30; VERKOPLUS 10w30 MSA
- f.
- Alternative recommendations, -10°C to 50°C: EO CNH 3622 10W-30; VERKOPLUS 15w40 LD / VERKOPLUS 15w40 MSA
- g.
- Mix ratio, 50% >-35°C
- h.
- -20°C to 40°C
- i.
- Alternative recommendations, -20°C to 40°C: HY CNH 3530B 46
- j.
- -20°C to 40°C
- k.
- Alternative recommendations, -20°C to 40°C: HY CNH 3530B 46
- l.
- Alternative recommendations: GR CNH 3555-A 2
- m.
- Alternative recommendations: GR CNH 3555-A 2
- n.
- Alternative recommendations: GO CNH 3516A 80W-90; VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
- o.
- Alternative recommendations: GO CNH 3516A 80W-90; VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
Oil Change Intervals
Engine (EN590/D975 <15ppm) (Isuzu GH-6HK1X, 6-cyl, 7.8L, 202kW)
- Hours Max
- 500
Engine (EN590/D975 500-1000ppm) (Isuzu GH-6HK1X, 6-cyl, 7.8L, 202kW [EN590/D975 500-1000ppm])
- Hours Max
- 250
Coolant
- Months Max
- 24
- Hours Max
- 4000
Hydraulics (Reservoir/System)
- Hours Max
- 5000
Hydraulics (Reservoir/System; Hammer Usage - 100%/40%)
- Hours Min
- 600
- Hours Max
- 1500
Grease Points
- Hours Max
- 10
Swing Gear Teeth
- Hours Max
- 2000
Swing Gearbox
- Hours Max
- 1000
Travel Gearbox (Each)
- Hours Max
- 2000
Turntable Bearing
- Hours Max
- 500