Our Recommendation
VERKOL 10w40 MV INYECCION is recommended for your BRODERSON
- Make
- BRODERSON
- Model
- Yardrunner IC200 (Chrysler) (Self Propelled Cranes)
- Engine
- P
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (P) (Chrysler)
|
VERKOL 10w40 MV INYECCION (a, b, c, d, e) |
|
|
|
Powershift Transmission
|
1
|
VERKOAGRI STOU 15w40 |
|
2 |
VESTA JD | ||
|
Hydraulics
|
1
|
VESTA HM 32 |
|
2 |
VESTA HLPD 32 | ||
3 |
VESTA HV 32 | ||
|
Grease Points
|
QUAKERTEK MOLYVERKOL 2 |
|
|
|
Wheel Bearings
|
QUAKERTEK ASTURUS 2 |
|
|
|
4 Speed Transmission
|
1
|
SALDUBA 80w90 LS |
|
2 |
VERKOL GT-7 SAE-90 EP | ||
|
Axle Pivot Pin
|
QUAKERTEK ASTURUS 2 |
|
|
|
Control Valve Shift & Handbrake Linkages
|
MAXIDIESEL SAE 30 |
|
|
|
Drive & PTO Shaft
|
QUAKERTEK MOLYVERKOL 2 |
|
|
|
Drive Axle
|
1
|
SALDUBA 80w90 LS |
|
2 |
VERKOL GT-7 SAE-90 EP | ||
|
Reduction Hubs
|
1
|
SALDUBA 80w90 LS |
|
2 |
VERKOL GT-7 SAE-90 EP | ||
|
Steering Cylinder & Tie Rod Ends
|
QUAKERTEK MOLYVERKOL 2 |
|
|
|
Swing Drive Gearbox
|
QUAKERTEK MOLYVERKOL 2 |
|
|
|
Swing Gear
|
1
|
MOLYBLACK |
|
2 |
QUAKERTEK VERKOTAC 350 | ||
|
Winch
|
VERKOL GT-7 SAE-140 EP |
|
|
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Chrysler & >0°C
- b.
- Alternative recommendations, Chrysler, -23°C to 0°C: SG+CD 10W; SG+CD 10W-30; VERKOL 10w40 MV INYECCION
- c.
- Alternative recommendations, Chrysler, <-12°C: SG+CD 5W-30
- d.
- Alternative recommendations, Chrysler, >0°C: SG+CD 10W-30; SG+CD 20W-40
- e.
- Alternative recommendations: SG+CD 10W-30
Oil Change Intervals
Powershift Transmission
- Months Max
- 6
- Hours Max
- 500
Hydraulics
- Hours Max
- 1000
4 Speed Transmission
- Hours Max
- 500
Drive Axle
- Months Max
- 6
- Hours Max
- 500
Reduction Hubs
- Hours Max
- 1000
Winch
- Hours Max
- 1000