Our Recommendation
VERATEK 10w40 is recommended for your MEC
- Make
- MEC
- Model
- TH60 (Telehandlers)
- Engine
- DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (DT) (MEC D4D CDE2, 70 kW)
|
1
|
VERATEK 10w40 (a, b) |
12.0
|
2 |
EXTREM NG 10w40 | ||
3 |
TITANIUM NG 10w40 UHPD | ||
|
Transmission (Powershift T12000)
|
VERKOL SAE 30 TO-4 (c, d) |
14.1
|
|
|
Coolant
|
VERKOL TRUCK 50% (e) |
14.0
|
|
|
Steering System
|
1
|
VESTA 5B (f, g) |
|
2 |
VESTA HV 68 | ||
|
Hydraulics
|
1
|
VESTA 5B (h, i) |
103
|
2 |
VESTA HV 68 | ||
|
Grease Points
|
QUAKERTEK ASTURUS 2 |
|
|
|
Axles (Front/Rear, each)
|
(j) |
7.7
|
|
|
Boom Sliding Surfaces
|
|
||
|
Drop Box
|
(k) |
1.1
|
|
|
Hubs (Front/Rear, each)
|
(l) |
1.3
|
|
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- -20°C to 45°C
- b.
- Alternative recommendations, -30°C to 30°C: VERATEK 5w30 / EXTREM NG 5w30
- c.
- Alternative recommendations: VERKOL SAE 10w TO-4
- d.
- Alternative recommendations, -40°C to 50°C: WB VOL 101
- e.
- Mix ratio, 50% >-37°C
- f.
- -5°C to 40°C
- g.
- Alternative recommendations, -15°C to 30°C: MULTIVESTA OP / VESTA HV 46
- h.
- -5°C to 40°C
- i.
- Alternative recommendations, -15°C to 30°C: MULTIVESTA OP / VESTA HV 46
- j.
- -40°C to 50°C
- k.
- -40°C to 50°C
- l.
- -40°C to 50°C
Oil Change Intervals
Engine (DT) (MEC D4D CDE2, 70 kW)
- Hours Max
- 500
Transmission (Powershift T12000)
- Hours Max
- 1000
Coolant
- Months Max
- 12
- Hours Max
- 2000
Steering System
- Hours Max
- 500
Hydraulics
- Hours Max
- 1000
Axles (Front/Rear, each)
- Hours Max
- 1000
Drop Box
- Hours Max
- 1000
Hubs (Front/Rear, each)
- Hours Max
- 1000