Our Recommendation
VERKOPLUS 15w40 LD is recommended for your JOHN DEERE
- Make
- JOHN DEERE
- Model
- 3015DF101 (Industrial Engines)
- Engine
- D / DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D / DT)
|
VERKOPLUS 15w40 LD (a, b, c) |
5.2
|
|
|
Coolant
|
VERKOL TRUCK 50% (d) |
|
|
General Notes
- 1.
- Fuel sulphur content greater than 0.5% results in oil change intervals reduced by half
Lubricant / Capacity Notes
- a.
- Oil change interval can be extended using John Deere PLUS-50 or E4/E5 with specified John Deere filters, up to a maximum of 500 hours. Without specified filters change engine oil and filters at the normal service interval
- b.
- During engine run-in use John Deere Engine Break-in Oil. Alternatively engine oils to CE/E1/D4 may be used during the first 100 hours of engine use
- c.
- Multigrade engine oils are preferred. Synthetic engine oils are also suitable
- d.
- Cooling systems: Do not use automotive type coolants. John Deere products strongly recommended. Use VERKOL TRUCK 50% at a concentration of 40% mixture of concentrate with quality water and approved supplemental coolant additives for all year operation. Alternative specification; low silicate ethylene glycol based coolant for heavy duty diesel engines to VERKOL TRUCK 50%TM D5345 (pre-diluted) or VERKOL TRUCK 50%TM D4985 (concentrate) plus supplemental coolant additives
Oil Change Intervals
There is no Oil Change Interval data to display for this model