VERKOL 10w40 MV INYECCION is recommended for your DEUTZ

Lubricant / Capacity Notes

a.

Alternative specification for continuous engine power greater than or equal to p =18 bar: D5; continuous engine power above p = 18 bar , CE/CF-4/D4

b.

TBD 616 with continuous engine power greater than or equal to p =18 bar and above 2100 rpm must use synthetic oils (Mobil Delvac 1 SHC or Shell Myrina TX specified). These oils also suitable for D/TBD234, TBD 604B, TBD 620, S/BAM 816

c.

Turbocharged engines with uprated power, and engines with high loading must use Deutz Oil TLX 10W40FE: 1013FC, 1015CP, all engines in CHP plants or gensets operating in parallel with the mains/with each other, engines in combines with: 1012, 1013, 2013, 1015, BF6L913C-176 kW at 2500/min, engines 2012/C with uprated power as of level ll of exhaust emission legislation for mobile machinery, engines BF4M2012 > 95kW, BF6M2012 >143 kW with cylinder bore diameter of 101mm or 98mm with MVS system, BF6M2012 >135 kW with a cylinder bore of 98mm with mechanical injection system. If unavailable, a list of other approved brands is available from Deutz, reference 0199-99-3002. These oils meet the MTU laboratory test, MTV 5040

d.

Alternative recommendations, -25°C to 30°C: CF 10W-30

e.

Alternative recommendations, >-25°C: VERKOL 10w40 MV INYECCION / EXTREM NG 10w40 / VERKOL 10w40 TD MAX

f.

Alternative recommendations, >-15°C: VERKOL TDI 15w40 / MAXIDIESEL 15w40 SHPD

g.

Alternative recommendations, >-10°C: CF 20W-40

h.

Alternative recommendations, -5°C to 30°C: MAXIDIESEL SAE 30

i.

Alternative recommendations, >25°C: MAXIDIESEL SAE 40