VERATEK 10w40 is recommended for your DEUTZ

Lubricant / Capacity Notes

a.

Also recommended

b.

Turbocharged engines with uprated power, and engines with high loading must use Deutz Oil TLX 10W40FE: 1013FC, 1015CP, all engines in CHP plants or gensets operating in parallel with the mains/with each other, engines in combines with: 1012, 1013, 2013, 1015, BF6L913C-176 kW at 2500/min, engines 2012/C with uprated power as of level ll of exhaust emission legislation for mobile machinery, engines BF4M2012 > 95kW, BF6M2012 >143 kW with cylinder bore diameter of 101mm or 98mm with MVS system, BF6M2012 >135 kW with a cylinder bore of 98mm with mechanical injection system. If unavailable, a list of other approved brands is available from Deutz, reference 0199-99-3002. These oils meet the MTU laboratory test, MTV 5040

c.

Alternative recommendations, -30°C to 30°C: VERATEK 5w30 / EXTREM NG 5w30

d.

Alternative recommendations, -30°C to >30°C: E4/E6 5W-40

e.

Alternative recommendations, <-30°C to 30°C: E4/E6 0W-30

f.

Alternative recommendations, <-30°C to >30°C: E4/E6 0W-40

g.

Alternative recommendations, -20°C to 30°C: E4/E6 10W-30

h.

Alternative recommendations, -20°C to >30°C: VERATEK 10w40 / EXTREM NG 10w40 / TITANIUM NG 10w40 UHPD

i.

Alternative recommendations, -15°C to >30°C: E4/E6 15W-40

j.

Alternative recommendations, -5°C to >30°C: E4/E6 20W-50