Our Recommendation
VERKOPLUS 15w40 LD is recommended for your DETROIT DIESEL
- Make
- DETROIT DIESEL
- Model
- 8.7LTA (Series 40E)
- Engine
- DT
Application |
Recommendation |
Capacity (ltr) |
Engine (DT)
|
1
|
VERKOPLUS 15w40 LD
(a, b)
|
|
2 |
VERKOPLUS 15w40 MSA
|
Coolant
|
(c)
|
|
General Notes
- 1.
- See Detroit Diesel Corporation Bulletin 7SE270 9706, 'Lubricating Oil, Fuel Oil and Filter Recommendations', for additional information on alternative lubricant requirements (DDC/MTU Series 2000/4000 only refer to Engine Service Fluid and Filter Requirements Publication 7SE273 9903). Synthetic oils may be used if API licensed and meet Detroit Diesel requirements. Must not contain VI improvers for 2-stroke engines
- 2.
- Fuel sulphur content above 0.5% may require higher alkalinity oils and reduced drain intervals. Low zinc, high TBN Marine/Industrial lubricants are recommended for marine and railroad applications of Series 149 and other 2-stroke engines where sulphur content exceeds 0.5%
- 3.
- Natural gas operation: See Bulletin 7SE272 for details.
Lubricant / Capacity Notes
- a.
- Outside USA oils meeting; E2-96, E3-96 or E5-99 and CG-4, CH-4 or CI-4 (preferred) may also be used prior to Jan 2007 (EPA04). Oils of lower performance may only be used at a 50% oil drain interval reduction
- b.
- Alternative viscosity grades to improve starting ability where ambient below -20°C; 5W-30, 5W-40, 10W-30, 10W-40. These oils must have ASTM D4741 viscosity 3.70 cP min. API CF-4 oils may be used with reduced drain intervals
- c.
- Engine application determines if cooled by water or air
Oil Change Intervals
Engine (DT)
- Km Min
- 9600
- Km Max
- 19200
- Months Min
- 6
- Months Max
- 12