Our Recommendation
VERKOPLUS 15w40 LD is recommended for your CUMMINS incl. ONAN GENERATORS
- Make
- CUMMINS incl. ONAN GENERATORS
- Model
- HDKCC (Onan Gen Sets)
- Engine
- D
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D)
|
VERKOPLUS 15w40 LD (a, b, c, d) |
5.6
|
|
|
Coolant
|
(e) |
6.2
|
|
General Notes
- 1.
- Synthetic oils, API category III, are recommended for ambient temperatures consistently below -25°C. Synthetic engine oils of 0W-30 viscosity may be used where ambient temperature does not exceed 0°C. Mineral oils are preferred, synthetic or part synthetic oils must not be used for break-in
- 2.
- Friction modified oils must not be used unless evidence of satisfactory performance in Cummins engines can be substantiated. Special break-in oils should not be used
Lubricant / Capacity Notes
- a.
- >-12°C
- b.
- Alternative recommendations, -18°C to 38°C: VERATEK 10w40 / VERKOPLUS 10w30 MSA / TITANIUM NG 10w40 UHPD
- c.
- Alternative recommendations, >0°C: CH-4 30
- d.
- Alternative recommendations, <10°C: VERATEK 5w30
- e.
- Mix ratio, 50%
Oil Change Intervals
Engine (D)
- Months Max
- 12
- Hours Max
- 250
Coolant
- Months Max
- 24
- Hours Max
- 1500