Close Print

Our Recommendation

VERATEK 10w40 is recommended for your VALTRA incl. VALMET

Make
VALTRA incl. VALMET
Model
N134 H (N Series HiTech)
Engine
DT
Year
2015-
Application
Recommendation
Capacity (ltr)
Engine (DT) (AGCO 49AWF, SCR; 99kW)
VERATEK 10w40 (a, b, c)
15.0
Transmission
  (d)
65.0
Front Axle Differential (Dana 730/503)
SALDUBA 80w90 LS
8.0
Front Axle Differential (Dana 730/574)
SALDUBA 80w90 LS
8.0
Front Axle Differential (Hi-Lock 740/557; 740/558; 740/559)
SALDUBA 80w90 LS
7.5
Coolant
  (e)
18.0
Hydraulics
From Transmission
Front Axle Hubs (730/503; 730/574 - each)
SALDUBA 80w90 LS (f)
0.9
Front Axle Hubs (Hi-Lock 740/557; 740/558; 740/559 - each)
SALDUBA 80w90 LS (g)
0.8
Grease Points
QUAKERTEK MOLYVERKOL 2
Front PTO
  (h)
2.8

General Notes

1.
2005, 2105 models: 'TRAC-TROL' and Servosystem: or, after flushing: VESTA C4 10w30
2.
VERKOAGRI STOU 15w40 may be used in all applications (for hydraulics, 10W-30 grades only) except those models requiring a limited slip oil for front axles and hubs

Lubricant / Capacity Notes

a.
-25°C to 40°C
b.
Alternative recommendations, -25°C to 40°C: VERATEK 10w40; VERKOPLUS 15w40 MSA
c.
Alternative recommendations, -20°C to 40°C: VERKOPLUS 15w40 MSA
d.
Alternative recommendations: GO VAL XT60 plus
e.
Mix ratio, 50% >-40°C
f.
Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
g.
Alternative recommendations: VERKOL GT-8/80w90 EP / SALDUBA 80w90 LS / VERKOL GT-7/80w90 EP
h.
Alternative recommendations: ATF ALL C4S

Oil Change Intervals

Engine (DT) (AGCO 49AWF, SCR; 99kW)
Hours Max
600
Transmission
Hours Max
1200
Front Axle Differential (Dana 730/503)
Hours Max
1200
Front Axle Differential (Dana 730/574)
Hours Max
1200
Front Axle Differential (Hi-Lock 740/557; 740/558; 740/559)
Hours Max
1200
Coolant
Hours Max
2400
Front Axle Hubs (730/503; 730/574 - each)
Hours Max
1200
Front Axle Hubs (Hi-Lock 740/557; 740/558; 740/559 - each)
Hours Max
1200
Front PTO
Hours Max
600