Application	Recommendation		Capacity (ltr)
Engine (DT)	(a, b)		19.0
Transmission	VERKOL SAE 30 TO-4		9.0 (c)
Final Drives (each)	VERKOL SAE 50 TO-4 (d, e, f, g, h, i, j, k)		9.0
Coolant	(l)		36.0
Hydraulics	VERKOPLUS 10w30 MSA (m, n, o)		22.0
Bevel Gear & Steering Clutches	VERKOL SAE 30 TO-4		61.0
Flywheel clutch compartment	VERKOL SAE 30 TO-4		9.0
Greases: Molybdenum	1	QUAKERTEK ATLANTA 2
	2	QUAKERTEK VERKOMAX R 250
	3	QUAKERTEK MOLYVERKOL 2
Greases: Multipurpose	1	QUAKERTEK VITALIA BF
	2	QUAKERTEK VERKOPLEX XP-2
	3	QUAKERTEK TERMOPLEX 220 EP
Greases: Special Purpose (high temp. antifriction bearings)
Midroller hubs	VERKOL SAE 30 TO-4
Pivot joint (where fitted)	1	VERKOL GT-8/80w90 EP
	2	SALDUBA 80w90 LS
	3	VERKOL GT-7/80w90 EP
Steering control mechanism (where fitted)
Winch (where fitted)	VERKOL SAE 30 TO-4

There are no notes to display for this model

a.: Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.: Alternative recommendations, -20°C to 40°C: EO CAT ECF-1 10W-30
c.: With steering booster: 68 ltr
d.: Factory fill viscosity: 50
e.: Alternative recommendations, -40°C to 10°C: TF CAT TO4 0W-30
f.: Alternative recommendations, -40°C to 0°C: TF CAT TO4 0W-20
g.: Alternative recommendations, -30°C to 10°C: TF CAT TO4 5W-30
h.: Alternative recommendations, -30°C to 0°C: VERKOL SAE 10w TO-4
i.: Alternative recommendations, -25°C to 25°C: VERKOL SAE 30 TO-4
j.: Alternative recommendations, -15°C to 50°C: VERKOL SAE 50 TO-4
k.: Alternative recommendations, -10°C to 50°C: TF CAT TO4 60
l.: Mix ratio, 50%
m.: Hydraulics/hydrostatic system
n.: Alternative recommendations, Hydraulics/hydrostatic system: VERKOAGRI STOU 15w40 / MAXIDIESEL 15w40 SHPD
o.: Alternative recommendations: CF-4 10W