Our Recommendation
VERATEK 10w40 is recommended for your CLAAS
- Make
- CLAAS
- Model
- Dominator 98VX (Dominator)
- Engine
- D / DT
Application |
Recommendation |
Capacity (ltr) |
|
|---|---|---|---|
|
Engine (D / DT) (Perkins 1006.60TW)
|
1
|
VERATEK 10w40 (a) |
13.5
|
2 |
EXTREM NG 10w40 | ||
3 |
TITANIUM NG 10w40 UHPD | ||
|
Engine (DT) (MB OM 366LA [DT])
|
1
|
VERATEK 10w40 (b) |
16.5
|
2 |
EXTREM NG 10w40 | ||
3 |
TITANIUM NG 10w40 UHPD | ||
|
Transmission (mechanical)
|
6.8
|
||
|
Coolant (Perkins/MB)
|
VERKOL TRUCK 50% (c) |
45.0 / 38.5
|
|
|
Hydraulics (incl. Ground Drive)
|
1
|
MULTIVESTA OP |
6.0 - 8.0
|
2 |
VESTA HV 46 | ||
|
All Grease Points
|
QUAKERTEK ASTURUS 2 |
|
|
|
Final Drive Hubs (Planetaries, each)
|
3.0
|
||
|
Claas 4-Trac (4WD Planetaries, each)
|
1
|
SALDUBA 80w90 LS |
0.8
|
2 |
VERKOL GT-7/80w90 EP | ||
|
Cutterbar Knife Drive
|
0.75
|
||
|
Drum Gearbox (Rotor)
|
1.0
|
||
General Notes
There are no notes to display for this model
Lubricant / Capacity Notes
- a.
- Alternative recommendations: VERKOPLUS 15w40 LD / VERKOPLUS 15w40 MSA
- b.
- Alternative recommendations: VERKOPLUS 15w40 LD / VERKOPLUS 15w40 MSA
- c.
- Mix ratio, 50% >-35°C
Oil Change Intervals
Engine (D / DT) (Perkins 1006.60TW)
- Hours Max
- 200
Engine (DT) (MB OM 366LA [DT])
- Hours Max
- 200
Transmission (mechanical)
- Months Min
- 12
- Hours Max
- 500
Coolant (Perkins/MB)
- Months Max
- 36
Hydraulics (incl. Ground Drive)
- Months Max
- 12
- Hours Max
- 500
Final Drive Hubs (Planetaries, each)
- Months Min
- 12
- Hours Max
- 500
Claas 4-Trac (4WD Planetaries, each)
- Hours Max
- 500
Cutterbar Knife Drive
- Months Max
- 12
- Hours Max
- 500
Drum Gearbox (Rotor)
- Hours Max
- 500