Close Print

Our Recommendation

VERKOPLUS 10w30 MSA is recommended for your CATERPILLAR

Make
CATERPILLAR
Model
907 (S/N HZ700001 - Up) (Wheeled Loaders)
Engine
DT
Year
2021-
Application
Recommendation
Capacity (ltr)
Engine (DT)
VERKOPLUS 10w30 MSA (a, b, c)
11.2
Transfer Case
  (d, e)
1.25
Transmission
From Hydraulics
Front Differential
  (f)
8.0
Rear Differential
  (g)
8.0
Coolant
  (h)
17.0
Hydraulics
VESTA 10w HD (i, j, k, l, m)
70.0
Grease Points
1
QUAKERTEK VERKOMAX FGM 2 (n)
2
QUAKERTEK VERKOMAX R 250
3
QUAKERTEK VERKOMAX SG 2
Centralised Lubrication System (Autolube)
1
QUAKERTEK VERKOMAX FGM 2 (o)
2
QUAKERTEK VERKOMAX R 250
3
QUAKERTEK VERKOMAX SG 2
Drive Shaft Bearings
1
QUAKERTEK TERMOPLEX 220 EP
2
QUAKERTEK ALHENA 1 EP
3
QUAKERTEK ALHENA 2 EP
Drive Shaft Universal Joint
1
QUAKERTEK TERMOPLEX 220 EP (p)
2
QUAKERTEK ALHENA 1 EP
3
QUAKERTEK ALHENA 2 EP
Final Drives (each)
  (q)
0.8

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
-18°C to 40°C
b.
Alternative recommendations, -18°C to 40°C: EO CAT DEO-ULS 10W-30; VERKOPLUS 10w30 MSA
c.
Alternative recommendations, -10°C to 50°C: EO CAT DEO-ULS 15W-40; VERKOPLUS 15w40 MSA
d.
20°C to 40°C
e.
Alternative recommendations, -40°C to 10°C: GL-5S 0W-20
f.
-25°C to 40°C
g.
-25°C to 40°C
h.
Mix ratio, 50% >-37°C
i.
-20°C to 40°C
j.
Alternative recommendations, -30°C to 45°C: HY CAT BIO HYDO 46
k.
Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; EO CAT DEO-ULS 10W-30
l.
Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
m.
Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30; VERKOL SAE 30 TO-4
n.
Alternative recommendations: QUAKERTEK ATLANTA 2 / QUAKERTEK VERKOMAX R 250 / QUAKERTEK MOLYVERKOL 2
o.
Alternative recommendations: QUAKERTEK ATLANTA 2 / QUAKERTEK VERKOMAX R 250 / QUAKERTEK MOLYVERKOL 2
p.
-30°C to 40°C
q.
-25°C to 40°C

Oil Change Intervals

Engine (DT)
Months Max
6
Hours Max
500
Front Differential
Months Max
12
Hours Max
1000
Rear Differential
Months Max
12
Hours Max
1000
Coolant
Months Min
36
Months Max
72
Hours Min
6000
Hours Max
12000
Hydraulics
Hours Max
6000
Final Drives (each)
Months Max
12
Hours Max
1000