Close Print

Our Recommendation

VERATEK 10w40 is recommended for your CASE CE

Make
CASE CE
Model
580N 4WD - Tier4f (Tier4B) (Backhoe Loaders)
Engine
DT
Year
2018-
Application
Recommendation
Capacity (ltr)
Engine (DT) (FPT F5BFL413C, 3.4L 67kW)
VERATEK 10w40 (a)
8.0
Transmission (Powershuttle, Refill / Total)
VESTA JD
13.0 / 19.4
Transmission (Powershitf S-Type, Refill / Total)
VESTA JD
14.3 / 20.7
Front Axle Differential (Standard Duty / Heavy Duty, each)
 
7.7 / 8.6
Coolant (without/with Heater)
  (b)
17.3 / 18.0
Hydraulic System (Total, Without / With Extendahoe)
VESTA JD
105 / 111
Hydraulics (Reservoir, Without / With filter change)
VESTA JD
50.5 / 52.4
Front Axle Hubs (Standard Duty / Heavy Duty, each)
 
1.0
Diesel Exhaust Fluid (DEF) Tank
 
13.5
Rear Axle & Hubs
 
13.6

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Alternative recommendations: E9/CJ-4 0W-40; EO CNH 3521 10W-40; EO CNH 3521 0W-40
b.
Mix ratio, 50% >-37°C

Oil Change Intervals

Engine (DT) (FPT F5BFL413C, 3.4L 67kW)
Hours Max
500
Transmission (Powershuttle, Refill / Total)
Hours Max
1200
Transmission (Powershitf S-Type, Refill / Total)
Hours Max
1200
Front Axle Differential (Standard Duty / Heavy Duty, each)
Hours Max
1000
Coolant (without/with Heater)
Months Max
48
Hours Max
4000
Hydraulic System (Total, Without / With Extendahoe)
Hours Max
2000
Hydraulics (Reservoir, Without / With filter change)
Hours Max
2000
Front Axle Hubs (Standard Duty / Heavy Duty, each)
Hours Max
1000
Rear Axle & Hubs
Hours Max
1000