Close Print

Our Recommendation

Make
CATERPILLAR
Model
318C (Material Handlers C Series)
Engine
DT
Application
Recommendation
Capacity (ltr)
Engine (DT)
  (a)
18.0
Rear Axle
SALDUBA 80w90 LS (b, c, d, e)
11.0 / 12.0
Transmission
1
VERKOAGRI STOU 15w40
3.0
2
MAXIDIESEL 15w40 SHPD
Front Axle
SALDUBA 80w90 LS (f, g, h, i)
8.5 / 10.0
Coolant
 
39.0
Hydraulics (Tank/System)
VESTA 10w HD (j, k, l, m, n, o)
170 / 255
Final Drive (with drum brakes)
SALDUBA 80w90 LS (p, q, r, s)
1.8
Final Drive (with wet disc brakes)
SALDUBA 80w90 LS (t, u, v, w)
2.0
Swing Gearbox
QUAKERTEK MOLYVERKOL 2
10.0

General Notes

There are no notes to display for this model

Lubricant / Capacity Notes

a.
Caterpillar list API CH-4 and API CI-4 as preferred oils and API CG-4 as an acceptable alternative. These oils must meet Caterpillar's ECF-1 specification to avoid reduced engine life. API CF-4 should not be used in Caterpillar diesel engines
b.
Alternative recommendations, Final Drives (each), -30°C to 40°C: LS 75W-90
c.
Alternative recommendations, Final Drives (each), -20°C to 40°C: SALDUBA 80w90 LS
d.
Alternative recommendations, Final Drives (each), -10°C to 50°C: LS 85W-140
e.
Alternative recommendations, Final Drives (each), 0°C to 40°C: SALDUBA 80w90 LS
f.
Alternative recommendations, Final Drives (each), -30°C to 40°C: LS 75W-90
g.
Alternative recommendations, Final Drives (each), -20°C to 40°C: SALDUBA 80w90 LS
h.
Alternative recommendations, Final Drives (each), -10°C to 50°C: LS 85W-140
i.
Alternative recommendations, Final Drives (each), 0°C to 40°C: SALDUBA 80w90 LS
j.
Caterpillar list API CG-4, API CF and CAT TO-4 as alternative specifications. These oils must have a minimum zinc content of 900 ppm
k.
-20°C to 40°C
l.
Alternative recommendations, -20°C to 40°C: TF CAT TDTO 10W; VERKOPLUS 10w30 MSA
m.
Alternative recommendations, -15°C to 50°C: TF CAT TDTO TMS
n.
Alternative recommendations, -5°C to 45°C: HY CAT HYDO 20
o.
Alternative recommendations, 0°C to 50°C: HY CAT HYDO 30
p.
Alternative recommendations, Final Drives (each), -30°C to 40°C: LS 75W-90
q.
Alternative recommendations, Final Drives (each), -20°C to 40°C: SALDUBA 80w90 LS
r.
Alternative recommendations, Final Drives (each), -10°C to 50°C: LS 85W-140
s.
Alternative recommendations, Final Drives (each), 0°C to 40°C: SALDUBA 80w90 LS
t.
Alternative recommendations, Final Drives (each), -30°C to 40°C: LS 75W-90
u.
Alternative recommendations, Final Drives (each), -20°C to 40°C: SALDUBA 80w90 LS
v.
Alternative recommendations, Final Drives (each), -10°C to 50°C: LS 85W-140
w.
Alternative recommendations, Final Drives (each), 0°C to 40°C: SALDUBA 80w90 LS

Oil Change Intervals

Engine (DT)
Hours Max
250
Rear Axle
Months Max
6
Hours Max
1000
Transmission
Months Max
6
Hours Max
1000
Front Axle
Months Max
6
Hours Max
1000
Coolant
Months Max
24
Hours Max
2000
Hydraulics (Tank/System)
Months Max
18
Hours Max
3000
Final Drive (with drum brakes)
Months Max
12
Hours Max
2000
Final Drive (with wet disc brakes)
Months Max
12
Hours Max
2000